![]() Older Magellan and Lowrance GPS receivers had a Simulator or In-Store Demo mode, which you can use as an input to ExpertGPS if you can't take your GPS outside to get a lock on enough satellites to use the regular NMEA - GPS Active protocol. ![]() It's important that any hardware that creates a virtual COM port be fully installed, connected, and running before you start ExpertGPS, so that the virtual COM port is detected by ExpertGPS. The Serial Port list in the Tracking dialog will show every active, working COM port on your computer, including physical RS-232 ports (rare these days), and virtual COM ports created by your USB-to-Serial adapter or Bluetooth GPS. If you have a Bluetooth GPS receiver, it will also have a driver that creates a virtual COM port for ExpertGPS to use. Select that virtual COM port as the Serial Port in ExpertGPS. This adapter will come with its own driver software which will create a virtual COM port on your computer. Very few modern computers still have serial ports, so if your GPS or marine electronics output NMEA to a serial port, you will probably need a Serial-to-USB adapter to connect to your laptop. The NMEA protocol is a serial data protocol supported by almost all marine equipment, and by almost all older GPS receivers. Click on the Tracking tab in the Preferences dialog.Ĭhoose a tracking protocol, and specify the serial port settings that ExpertGPS will use.To show the Tracking dialog, do the following: Configuring a Tracking Protocolīefore you can use ExpertGPS as a moving-map display, you need to configure the Tracking Protocol that your GPS or tracking data source uses. Some devices, like Garmin's fitness bands and sports watches, simply don't support real-time tracking. If you have a Garmin Rino or Alpha, select Basestation Mode, and ExpertGPS will also track your hunting dogs or your Rino units out in the field. If, when you plug your GPS into your computer via USB, you see a question on the GPS screen asking whether to switch to Mass Storage, click No. If you have a Garmin automotive GPS (nuvi, Drive) or handheld GPS that connects to your computer with a USB cable (Oregon, Montana, GPSMAP 64, etc), you'll use the Garmin PVT via USB protocol below. Tracking requires a GPS receiver or GPS antenna capable of continously outputting position, speed, and time information in a Tracking Protocol that ExpertGPS can interpret.ĮxpertGPS currently supports the NMEA 0183 protocol (via serial cable, USB adapter, or Bluetooth), Garmin's PVT (Position, Velocity, Time) protocol for USB-based GPS receivers, and Microsoft's Location API for Windows laptops with an integrated GPS receiver.Ĭonfiguring Popular GPS Receivers for Tracking ![]() Your position and heading on the map, and records a tracklog showing where you've been. The Tracking feature in ExpertGPS turns your laptop into a real-time moving map display. Real-Time Tracking: Using ExpertGPS as a Moving-Map Display ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |